Clear PET filmFilm rollEC-PET140EC7
Innovative cling technology: it doesn't rely on chemical adhesion, magnetic force or static — it clings onto glass and other smooth surfaces easily by using vacuum force. So it is low-tack and will not leave adhesive on the applying surface.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | EC-PET140EC7 |
|---|---|
| Base / Surface | Clear PET film, Ultra clear glossy surface |
| Adhesion system | Easy Cling™ Vacuum Cling Film |
| Print compatibility | Eco-solvent, Latex, UV Digital |
| Film thickness | 140±9 μm |
| Total thickness | 190±12 μm |
| Release liner thickness | ≈ 50 μm |
| Elongation at break | >80% |
| Dimensional stability | ≦0.1 in |
| Available sizes | Standard: 1370mm × 50m / 1370mm × 100m; 1520mm × 50m / 1520mm × 100m |
| Service temperature | -30~130 ℃ |
| Appearance | Ultra clear |
| Indoor / outdoor | Indoor |
| Shelf life | Two years |
Installation
- The application surface must be clean and free of dirt.
- Wet application is recommended. To avoid bubbles from remaining water, place a liner sheet as a pad and squeegee all water out from between the film and the surface. Do not leave any water on the surface.
Storage
- Store sealed, away from light, in the original packaging.
- Store at 15～30℃ (59～86℉) and 40~70% relative humidity.
Cautions
- To optimize print results, set the printer to its best print mode before printing.
- Avoid hand oil and dirt contaminating the print surface.
- Keep the film flat during application — creases and wrinkles will affect cling.
- Due to different applying surfaces and environments, we cannot guarantee the material will work in every condition. Please test on the applying surface before large-scale use.
Where EC-PET140EC7 goes to work
Common questions about EC-PET140EC7
Q1How does Easy Cling™ vacuum cling film adhere without glue?
Easy Cling™ clings to glass and other smooth surfaces purely by vacuum force — no chemical adhesion, magnetism or static. It is low-tack by design, so it will not leave adhesive on the applying surface when removed.
Q2Should Easy Cling™ film be applied wet or dry?
Wet application with water is recommended for most Easy Cling™ models. Spray the clean surface, position the film, place a liner sheet as a pad, then squeegee all water out — any water left on the surface will form bubbles. EC-PP210WW4 is applied dry with a scraper.
Q3Will Easy Cling™ leave residue after long-term use?
No. Because Easy Cling™ bonds by vacuum force rather than adhesive, it leaves no residue at all even after a very long application period — the surface needs no cleaning after removal and is never damaged.
Q4What is Easy Cling™ film used for?
Easy Cling™ is a removable, recyclable printing media designed for window and smooth-surface graphics — retail window advertising, seasonal promotion and glass decoration in the graphics, printing and sign markets.
Other models in this series
12 models in total — view the full comparison table →
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test EC-PET140EC7 on your own printer
We ship A4 and roll samples worldwide. Tell us your printer model and target surface — our engineers will confirm compatibility and quote within one working day.